How to Mount a Dartboard in a Cabinet – A Easy Guide for Everyone

How to Mount a Dartboard in a Cabinet – A Easy Guide for Everyone

6 minutes read
Aug 23rd, 2023

Welcome, fellow dart enthusiasts! If you’re eager to elevate your dart-playing experience and create the ultimate hangout spot, you’ve come to the right place. Today, we’re diving into the art of mounting a dartboard in a cabinet like a pro. Whether you’re setting up a man cave, game room, or just a cozy corner, we’ve got you covered at Ingahub!



  • Step 1: Space Matters – Get Your Measurements Right
  • Step 2: Preparing the Cabinet for Mounting
  • Step 3: Finding the Perfect Wall Spot
  • Step 4: The Art of Mounting
  • Step 5: Mounting the Dartboard in a Cabinet
  • Step 6: The Perfect Dartboard Placement

Step 1: Space Matters – Get Your Measurements Right

Before you start the installation process, let’s talk space. To ensure your dartboard cabinet hangs perfectly, you need enough room for seamless throws. For soft-tipped darts, players throw from a distance of 96 inches or 8 feet (or 244 cm), while steel-tipped darts require 93.25 inches or 7.8 feet (or 237 cm) from the face of the dartboard. Make sure you also allow ample space for players to stand comfortably and accommodate those inevitable missed throws.

Step 2: Preparing the Cabinet for Mounting

First things first, locate the center of your dartboard cabinet. Check for predrilled holes; these will come in handy when securing the mounting clip. Hold the clip over the screw holes and mark the cabinet’s center at the bottom of the slot. This point marks the bullseye’s center, a sweet spot for future precision, which we’ll use later to measure where to hang the cabinet.

Step 3: Finding the Perfect Wall Spot

For a secure mount, find your wall studs before drilling. These studs provide the strongest foundation for your dartboard cabinet. Avoid wall anchors if possible, but if you can’t access wall studs, use the appropriate anchors according to your wall type.

Step 4: The Art of Mounting

Now comes the exciting part – mounting the cabinet! Place the cabinet in a level position on the wall, ensuring that the pre-drilled holes in the four corners align with the wall studs (about 16 inches or 1.3 feet apart).

How high to mount a dartboard cabinet? Use your earlier mark to position the cabinet 68 inches or 5.8 feet (or 173 mm) above the floor.

If you’re using wall anchors, drill four holes and secure them in place. Otherwise, hold the cabinet in place and secure it to the wall using screws. Make sure the cabinet is level and that the doors open and close smoothly.

Step 5: Mounting the Dartboard in a Cabinet

Now that your cabinet is hanging proudly, let’s focus on the main star – the dartboard! If your cabinet has a center mark, excellent! If not, don’t worry; we’ve got you covered.

Here’s how to mount a dartboard in a cabinet:

1. Follow your cabinet manufacturer’s instructions to mount the bracket securely.

2. Turn the mounting screw into the center of the dartboard’s back, leaving a small gap between the screw head and the board. This gap allows the screw head to fit snugly inside the slot of the mounting bracket.

3. Slide the screw head into the bracket’s slot to hang the dartboard loosely on the wall. Then, remove the dartboard and tighten the center screw about half a turn. Rehang the dartboard and check for any looseness. Repeat these steps until your dartboard hangs without any wobbling.

Pro Tip: Ensure that the number 20 is positioned at the top for a traditional setup!

Step 6: The Perfect Dartboard Placement

We’re almost there! Now that your dartboard is hanging securely, it’s time to ensure it’s at the correct height. The center of the bullseye should be 5 feet 8 inches from the ground, which corresponds to the regulation height. Double-check the height to guarantee an authentic dart-playing experience!

Hanging a dartboard cabinet is a rewarding and straightforward DIY project that can transform any space into an exciting game zone. Just remember to measure the distance, find those trusty wall studs, and follow the steps to mount your cabinet and dartboard securely.

With your cabinet proudly displaying your dartboard, you’re all set for unforgettable dart matches. So, gather your friends, grab some darts, and get ready to hone your skills in the comfort of your own home!

Remember, practice makes perfect, so keep aiming for that bullseye and enjoy the thrilling world of darts! Happy darting!

Thoughts on “How to Mount a Dartboard in a Cabinet – A Easy Guide for Everyone

Articles and Insights


Winmau Blade 6 vs Blade 6 Dual Core vs Blade 6 Triple Core: Which to Buy

If you want to practice professionally, then Triple Core. Dual Core brings the best for money while Blade 6 standard has the lowest price.

Jun 12th, 2024


Arachnid Cricket Pro 800 vs 900: Which Is Better?

Cricket Pro 900 has a higher price than the 800 since it offers certain advanced features and more games. Let’s find out more!

May 24th, 2024