How to Clean a Dartboard (Do It The Right Way)

It’s always a good idea to clean your dartboard on a regular basis. This not only keeps it looking new but also maintains the quality of your board. In this article, we will describe the steps on how to clean a dartboard based on its type and how to get rid of any mold formed on the surface. You will be able to keep your dartboard in good condition for years to come!

Why Should You Clean Your Dartboard?

Despite being built with good materials, a dartboard will eventually wear out and decrease in quality, especially if you play regularly. Not keeping it clean will push your dartboard to the point where it’s unable to use even faster.

A dartboard might not be a very big investment. But to get the most out of it, you should clean your dartboard regularly to maintain it in good condition. Cleaning a dartboard is quite an easy task and not time-consuming as many people think. We’ll show you how to do it.

How to Clean a Dartboard (Electronic, Bristle, Wooden)

Different kinds of dartboards have different ways of cleaning, depending on their materials. In the next sections, we’ll show you how to clean some of the most popular types, including electronic, bristle, and wooden dartboards.

How to Clean an Electronic Dartboard

Since an electronic dartboard is made of plastic, it’s quite fast and easy to clean.

First, unplug your electronic dartboard from the power source. Then, use a soft cloth to get rid of any dirt or debris accumulated over time on the surface. Next, use a damp cloth to wipe down the board. You can use mild soap if needed. Be sure to avoid getting the board too wet.

Then, use a dry cloth to remove any moisture. Finally, use a cotton swab or soft brush to clean any hard-to-reach areas, such as the crevices between the scoring buttons.

How to Clean a Bristle Dartboard

Bristle dartboard is the most popular type. It’s also the most tricky one to clean. Many people just spray water on the surface or wipe it with a soapy wet cloth. This way of cleaning would downgrade or even ruin the dartboard very quickly.

Here are 5 steps to clean your bristle dartboard in the correct way:

Step 1. Clean the outer ring

The outer ring is the ring that holds the score number. If you can, remove it from the board. You will see it holds a lot of built-up dirt and leave a lot of dirt on the board surface.

Then, give the ring a good clean-through. You can also use corrosion inhibitors to prevent it from rusting.

Step 2. Wipe with a dry cloth and vacuum the board

Use a dry cloth to wipe down the loose dirt on the surface first. Then, use a low-pressure vacuum to “suck out” the remaining dirt. This is a much better way of spraying water or using any chemicals to clean the board.

Step 3. Wipe with a soft and very slightly damp cloth

If you want to be more careful, use a soft and slightly damp cloth to wipe down the stains and hard-to-remove dirt on the board. But remember to squeeze as much water out of the cloth as possible. The last thing you want is to let your board get wet since the fiber can absorb water and get bloated, thereby ruining the dartboard.

Step 4. Wipe again with a dry cloth

Wipe the board one last time with a dry cloth to remove the moisture. At this point, your dartboard should be clean.

Step 5. Put the outer ring back in

If you remove the outer ring as the first step, then the last step is to put it back in. But before you do that, remember to rotate the board.

Players tend to hit particular areas more than others. For example, the triple-20 section since it gives the most points. Therefore, rotating the board makes different areas get even hits, helping the dartboard to stay in good condition as a whole.

That’s the process of how you should clean a bristle dartboard.

How to Clean a Wooden Dartboard

Wooden dartboards were popularly used before bristle and electronic dartboards arrived. Now, it’s not something you normally see.

A wooden dartboard requires regular maintenance. Since it is made of wood, you’ll need to soak it up when it’s not in use to prevent it from drying and cracking up.

Make sure not to clean the board when it’s soaking and softening. Hang it out in the sun for 30-60 minutes to dry it out a little bit. When it’s damp enough, lightly and carefully brush the surface with a dry cloth or a toothbrush.

How Often Should You Clean a Dartboard

Dartboards, whether they are electronic, bristle, or wooden should be cleaned on a regular basis. How often you need to clean your dartboard depends on the type of board and how often it is used. Cleaning your dartboard regularly will help to keep it in good condition and prolong its life.

Here are some general guidelines:

• Clean an electronic dartboard after each use since it’s easy to clean due to the plastic material
• Clean a bristle dartboard at least once a week. More often if it is used frequently.
• Make sure to soak up a wooden dartboard regularly for maintenance and clean it accordingly.

How to Clean Mold off a Dartboard

The most important thing to remember is don’t use any chemicals to spray on the board to kill the mold. It might do the job of removing the mold, but it also ruins your dartboard.

So, how to clean mold off a dartboard? First, leave the board under the sun for several hours. Remember to check on it to make sure the sun helps remove the mold from the dartboard but does not damage it.

After that, bring it back inside and carefully clean the remaining mold with a brush or a toothbrush.

Here’s the best tip to clean mold off a dartboard: don’t let it happen! Since mold easily grows in a warm and wet environment, the best way to prevent your dartboard is to keep it in a dry and cool place. Cleaning the board also helps. Remember to clean it regularly or at least once in a while even if you don’t use it.

Tips to Clean and Maintain Your Dartboard

We’ve shared with you some tips here and there in this blog. Let’s summarize them here:

• Don’t spray water or liquid on the board, even when it has mold
• Rotate the board often for different areas on the board to get hits evenly
• Keep the board in a dry and cool place
• Clean the board regularly to make it long-lasting and reduce the chances of getting mold
• Use something to cover or put it into a bag if you don’t play darts often

Conclusion

Cleaning a dartboard should be easy and fast if you take care of it often. We’ve shared with you the steps on how to clean a dartboard, according to each type, and the tips to maintain it in good condition. Remember to follow and clean your dartboard regularly. Thanks for reading!